24" Araya Star Downhill -Dirt Jump Disc Only Rims on
Tensile Single Speed Sealed Bearing Disc Hubs.
Go to bottom to purchase
This new Rim Section has been developed by Araya specifically for the Downhill / Dirt Jump market. A super tough 39mm Aero section double skin alloy with star pierced holes all around it to reduce the weight without compromising its strength.
All carefully laced onto Tensile Single Speed Disc Hubs using 36 Araya Stainless Steel Double Butted Spokes for lightness and strength and trued with Araya Black Anodised Alloy Nipples.
The fully sealed bearing Hubs have CNC machined 'bite' scallops all around the edges of the flanges, done after anodising to give contrasting silver. The Hi-Lo front and Equi-Flange rear both have six bolt International Standard Disc Mounts. The front hub has 100mm spacing and the rear has 130mm.
Finally for security they both have domed head allen key fixing bolts and black anodised CNC domed washers.
All carefully laced onto Tensile Single Speed Disc Hubs using 36 Araya Stainless Steel Double Butted Spokes for lightness and strength and trued with Araya Black Anodised Alloy Nipples.
The fully sealed bearing Hubs have CNC machined 'bite' scallops all around the edges of the flanges, done after anodising to give contrasting silver. The Hi-Lo front and Equi-Flange rear both have six bolt International Standard Disc Mounts. The front hub has 100mm spacing and the rear has 130mm.
Finally for security they both have domed head allen key fixing bolts and black anodised CNC domed washers.
SPECIFICATION
- Size: 24" X 1.75 To take tyres from 24 X 1.75 to 24 x 3.00
- Weight: Rear 1.094 K. Front 1.028 K.Bolts/Spacers 0.051 K. Pair Total 2.173 Kilo's
- Axle widths Front 100mm and Rear 130mm. Max. Rim width 39mm.
- Requires special rim tapes due to star pierced holes.
- Rims have no braking surface for the use of Vee/ Caliper/ Cantilever brakes.
- Disc brake only with International Standard 6 Bolt Disc Mounts.
- Rims are alloy with chrome plating and hubs are AL7075 alloy with black anodising.
